Milling Machine F1210 Special edition with tool holder iso30
Special Edition with Tool holder ISO30
- steep taper ISO30 (DIN 2080) and tightening thread M12
- factory installed
Vertical milling machine
- for metal processing
Ingenius
- thanks to the quill feature with drill depth stop, unit can also be used for drilling operation
Silent running
- extrem geräuscharmer Lauf durch moderne elektronisch regelbare Antriebstechnologie
Universal
- Milling head with 90° swiveling feature in both directions
Perfect
- Tool clamping and ejecting system
- for clamping and ejecting the tools (mills, drills, clamping chucks etc.)
- no need to drive out tools with a hammer, therefore, no damage to the anti-friction bearings
Work table
- 700 x 180 mm
Working range
- 500 mm longitudinal travel X-axis
- 150 mm transverse travel Y-axis
- 280 mm vertical travel Z-axis
Main drive motor
- 230 V, 50/60 Hz
- 1.4 kW, 140 – 3000 rpm
- Single-phase inverse-speed motor speed-controlled as direct current model with permanent, closed loop rpm control system
- with overload protection
- Spindle speed can be adjusted by means of a potentiometer over a wide range of cutting speeds
- Constant torque throughout the entire speed range
Tool spindle
- with re-adjustable anti-friction bearings arranged in a large diameter drilling- and milling quill
- high torque even in the lowest speed range e.g. for machining hard-to-cut materials
- wide toothed belt between motor and tool spindle ensures a slip-free drive and a smooth running
Dovetail guides
- free of play adjustable in all axes
- 2 protective accordion bellows to protect dovetail guides
- results in clean machined surfaces due to fine adjustable, fine tunable dovetail guides
Application
- for hobby, model building, craft, workshop, industry and education use
- for single and small-series production
Warranty
- 5 years warranty – the warranty does not cover parts subject to wear
- Availability of spare parts also guaranteed after warranty period
Personal tours
- You are cordially invited to visit our showroom in Remscheid. Come and convince yourself of the quality
and precision of the WABECO machines and reap the benefits of a thorough consultation.
Special machine construction
- We also offer special machine construction – please contact us
TECHNICAL DATA
| Working range | |
| Longitudinal travel X-axis | 500 mm |
| Transverse travel Y-axis | 150 mm |
| Vertical travel Z-axis | 280 mm |
| Drill stroke | 55 mm |
| Distance milling table – tool spindle | min. 90 mm max. 370 mm |
| Outreach tool spindle – column | 185 mm |
| Machine precision | |
| Machine precision | according to DIN 8615 |
| True running accuracy of the tool spindle | 0.01 mm |
| Main drive motor | |
| Main drive motor 230 V, 50/60 Hz | 1.4 kW |
| electronically infinitely variable drive | 140 – 3000 rpm |
| Drive technology | |
| Drive electronics with multiple fault monitoring circuit | ● |
| e.g. milling in steel with a shank cutter Ø 10 mm with one infeed | approx. 10 mm |
| Feed screws | |
| free of play adjustable trapezoidal thread spindles in all axes | by means of adjustable bronze double nuts |
| Reading accuracy of the scale rings | 0.05 mm |
| Tool spindle | |
| Tool holder | ISO30 (DIN 2080) and tightening thread M12 |
| Z-column and coordinate table | |
| made of ribbed gray cast iron | ● |
| Work table | 700 x 180 mm |
| Number of T-slots | 3 |
| Width of T-slots | 12 mm |
| Center distance between T-slots | 50 mm |
| Fine feed in the Z-axis | ● |
| Milling head | |
| Swiveling range of the milling head in both directions | 90° (-90° to +90°) |
| Angle position | easily read-off of the large scale |
| Vertical positon can be preset by means of a hardened and ground conical index pin | ● |
| Protective hood | ● |
| form-fit clamping of the quill | over the entire lateral surface |
| Quill stroke | with drilling depth stop |
| Reading accuracy scale ring – quill stroke | 0.1 mm |
| Dimensions and weight | |
| Machine dimensions without packaging | W900 x D610 x H670 mm |
| Weight without packaging | 101 kg |